Name: Netvio EX-HT2-701-10 HDBaseT Extender
Brand: Netvio
SKU: EX-HT2-701-10
Price: 458.00 GBP
Availability: InStock

IP-SW-48P-10

Pre-Configured 48-Port AVoIP Switch

48× Gigabit PoE+ Ports — Power and data delivered on one cable per endpoint.
Factory Pre-Configured — Ready for Netvio JP4 encoders, decoders, and controllers with zero IT programming.
Eliminates the complexity of VLAN, IGMP, and multicast programming, enabling true plug-and-play deployment.
High PoE Power — 900 W PoE budget to support all connected Netvio devices.
Supports up to 45 Endpoints — Ideal for medium scale single switch AVoIP systems.
Dedicated Controller Ports — Optimized for Netvio IP-JP4-CL-10 central controller integration.
Rackmount Form Factor — Professional 1U chassis designed for 24/7 reliability.

General

Model: IP-SW-48P-10
Type: 48-Port Managed Gigabit PoE+ Switch
Use Case: Netvio JP4 AV-over-IP deployments up to 45 endpoints

Ports & Connectivity

48 × 10/100/1000 Mbps PoE+ Ports (blue) for endpoints
Dedicated Controller Ports for IP-JP4-CL-10
LAN Uplink Ports (white) for router or wider network (Ethernet/SFP)

Performance

Switching Capacity: 108 Gbps
Forwarding Rate: Wire-speed, non-blocking architecture
PoE Standard: IEEE 802.3af/at (PoE+)
PoE Budget: ~900 W total (typical)

AVoIP Optimization

Pre-configured for JP4 Series operation
Multicast, IGMP snooping, and jumbo frames enabled
Optimized for ContentPlus+ and Dante (on DNT models)

Mechanical & Environmental

Form Factor: 19” Rack Mount (1U)
Dimensions: 440 mm (17.3″) wide, 350 mm (13.8″) deep, and 46 mm (1.8″) high
Weight: Approximately 4.5kg (9.lbs)
Enclosure: Metal, black finish
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Humidity: 20–90% RH non-condensing

Compliance

Certifications: CE, UKCA, FCC, RoHS

Works with…….

All versions of JP4 Series
IP-JP4-CL-10 Controller
- Not required in Dante AV-A mode.
TS-13-10 (Touch Panel) moving to TS-10-10

Whats Included

Network Switch
Detachable Rear Ears with hardware
Regional Power cord
User Information

Warranty

5 Years (2 Years advanced replacement).
Full warranty conditional available at www.netvio.co.uk or www.netvio.io

IP-SW-48P-10

Pre-Configured 48-Port AVoIP Switch

The Netvio IP-SW-48P-10 is a 48-port Gigabit PoE+ (non-stackable) switch optimized for larger Netvio JP4 Series AVoIP deployments. Preconfigured for multicast video distribution, it enables true plug-and-play operation with JP4 encoders, decoders, and the IP-JP4-CL-10 controller, eliminating the complexity of IT-managed switch configuration.

With an extended 900 W PoE+ budget, the IP-SW-48P-10 delivers up to 30 W per port, providing direct power for large numbers of endpoints and controllers without external adapters. This simplifies cabling, reduces rack clutter, and ensures reliable 24/7 operation across demanding, high-density AV systems.

Designed for professional AV integration, the switch supports pre-configured IGMP snooping/querier, VLAN segmentation, and QoS prioritization, ensuring stable, synchronized video and audio transport across large networks. The 1U 19″ rackmount form factor includes rack-mount hardware and front-panel indicators for per-port PoE and link/activity, making deployment and maintenance straightforward.

Plug & Play AVoIP

Upto 45 Endpoints

PoE for all devices

JP4 Compatibility

Labelled Ports

Project may never have happened, but for Netvio

Integrators

Go

Integration is effortless with Netvio's Universal API

Programmers

Go

Simplified, Scalable & Secure IT management.

IT Managers

Go

No. The IP-SW-24P-10 is delivered fully pre-configured for AV-over-IP. All the complex networking tasks such as IGMP snooping, VLAN allocation, jumbo frame handling, and multicast support are already set up at the factory.

This means installers can connect Netvio encoders, decoders, and controllers without diving into switch programming menus, saving hours of setup time and ensuring a reliable system from the start.
The IP-SW-48P-10 is optimized to support up to 45 endpoints in a single system. This makes it a perfect fit for small to medium projects such as corporate meeting spaces, classrooms, training facilities, and hospitality venues.

For larger installations that require more endpoints, Netvio recommends moving to approved 3rd party switches.
Yes. The IP-SW-48P-10 includes a 900 W PoE+ budget, which delivers both data and power over a single cable to connected Netvio encoders and decoders. This makes installation much simpler by eliminating the need for local power supplies behind each display or source.

In addition, the switch can also power one Netvio Touch Screen directly via PoE. (Please refer to Netvio’s official documentation for compatibility details and best practices regarding powering accessories.)
Yes, Netvio has developed drivers for Crestron, AMX, Q-SYS, and other leading platforms, which are available for download.

This allows the CL-10 to integrate smoothly with traditional enterprise-class control environments, meaning it can sit comfortably within existing AV ecosystems while still delivering the benefits of the Netvio workflow.
No. One of the main benefits of the IP-SW-24P-10 is that it removes the IT barrier to entry. Installers do not need advanced networking expertise — they simply plug encoders, decoders, and the Netvio CL-10 controller into the designated ports.

All system communication, video routing, and audio transport happen seamlessly in the background, ensuring a professional-grade installation without IT complexity.

However, if the switch is being connected into a third-party IT network (for example, sharing infrastructure with office data or other AV systems), Netvio strongly recommends consulting with the site’s IT administrator before connecting. This ensures compatibility with existing network policies and avoids conflicts with multicast traffic or QoS settings.
Yes. The switch provides dedicated uplink ports for connecting to a router or the wider LAN. This allows the AV system to integrate with building control systems, cloud services, or remote management tools.

It also ensures that AV traffic is kept separate from standard office traffic while still maintaining controlled network access when required.
The IP-SW Series is designed for Netvio Mode Dante traffic when used with JP4-60-DNT models.

However, for full Dante AV-A deployments, Netvio recommends using approved third-party managed switches (such as Cisco or Netgear) that can be configured according to Dante’s networking requirements.

These switches provide the advanced QoS, IGMP, and redundancy options needed for larger Dante AV-A projects.
No. IP-SW Series switches (e.g., IP-SW-24P-10) are pre-configured single-switch appliances designed for plug-and-play simplicity.

If your project requires more than one switch (core/access designs, larger endpoint counts, or mixed network segments), use an approved third-party managed switch and follow Netvio’s AVoIP configuration guides.