
EX-HT2-701-10
70m (231ft), 4K60 (4:4:4), HDMI Extender over Cat6/6a Cable with HDR, ARC, Ethernet, Power & Control
-
HDMI 2.0b with HDCP 2.2 / DVI 1.0 compliant
-
18Gbps bandwidth, resolutions up to 4K@60Hz 4:4:4 with HDR10+, Dolby Vision & HLG
-
Extends signals up to 100m / 328ft via single Cat6/6a
-
HDBaseT LAN pass-through for Ethernet at remote locations
-
ARC (Audio Return Channel) with selectable SPDIF or L/R analog output
-
Local audio extraction on transmitter
-
Bi-directional IR and RS-232 pass-through for full control flexibility
-
PoC (Power over Cable) — one power supply for both units
-
Wide audio format support: LPCM, Dolby, DTS, DTS:X
4K60 (4:4:4)
70m (231ft)
ARC
Ethernet
PoC

The EX-HT2-701-10 supports HDMI 2.0b with 18Gbps bandwidth, delivering 4K60Hz 4:4:4 HDR video up to 70m (231ft) and 1080p60 video up to 100m (328ft) using a single CAT6a/7 cable. This makes it suitable for demanding UHD applications including home cinema, corporate presentation systems, and large digital signage deployments.
Yes. The extender is fully compatible with HDR10, HDR10+, Dolby Vision, and HLG. This ensures full reproduction of today’s high dynamic range content for lifelike colors, high contrast, and detail in both bright and dark scenes.
In addition to HDMI, IR, and RS-232 signals, the EX-HT2-701-10 provides a 100Mb Ethernet channel over the same HDBaseT cable. This allows a standard LAN connection to be extended from the transmitter (TX) to the receiver (RX), making it possible to connect a remote display, streamer, control system, or other network-enabled device directly to the network without additional cabling. This is especially valuable in installations where both AV and network connectivity are required at the display location.
The EX-HT2-701-10 supports ARC (Audio Return Channel) via HDMI, with audio routed back to the transmitter and output through the SPDIF (optical) port. eARC is not supported, meaning lossless immersive formats such as Dolby TrueHD or DTS-HD Master Audio cannot be returned via ARC.
⚠️ Note: This product does not support eARC, but other Netvio models are available including the EX-HT3-4001-10
The extender passes through HDMI audio including LPCM 2.0/5.1/7.1, Dolby Digital, Dolby TrueHD, DTS-HD Master Audio, and DSD. ARC audio supports common compressed formats such as Dolby Digital and DTS, which are sufficient for most TV streaming apps.
Yes. The EX-HT2-701-10 supports PoC, allowing either the TX or RX to be powered, with the other unit receiving power over the HDBaseT cable. This reduces clutter and eliminates the need for additional power adapters at both ends.









.png)
.png)


.png)



